Online Ping IPv4 tool sends ICMP packets to ping a destination IP or domain to check either it's accessible on the IP network or not.
Ping utility helps to check if the destination IP is assigned to some device and responding respectively. Just put an IPv4 address to ping it online.
The IPv4 was the first kind of IP created in networking. They are short in number, and the maximum available to be ever assigned to devices are 4,294,967,296.
In a computer network, the data is sent in small blocks called packets. Each packet is transmitted individually and may adopt a different route to reach its destination.
Once all the packets of the original message reach the destination. All packets are re-assembled to form the original message. But sometimes, due to some hurdles, like network congestion, the webserver is down, or some other technical error, there are the chances that the message will not reach the destination.
Ping (Packet InterNet Groper) is a computer network administration utility that helps one to check either a particular IP address or domain is accessible on the computer network or not. Ping works by sending a packet to a provided address and waits for the reply. It also measures round trip time and reports errors.
The Ping tool uses the Internet Control Message Protocol (ICMP) Echo function detailed in RFC792. A small packet will be sent to the given IPv4 address. The packet contains 64 bytes, 56 data bytes, and 8 bytes of protocol reader information.
Ping works by sending ICMP "echo request" (ping) packets to the target host and listening for ICMP "echo response" (pong) replies. Per RFC1122, "Requirements for Internet Hosts," each host must send an echo reply when pinged.
However, that may not always be the scenario. Sometimes, the firewall blocks the echo request to prevent distributed denial of service (DDoS) attacks, reduce the host's visibility, or even by mistake.
A ping test is used to check either the device or host is connected or accessible on the network or not. The test checks whether the host or the provided URL is online or offline and checks the delay between two computers. The Ping service sends several ICMP packets to an IP or domain and returns the detailed output. It also tells how many packets were transmitted and how many were lost during that ping activity.
Several internet speed test tools also display the ping results. A good internet speed test tool tries to create connections with multiple servers. However, the server with the lowest connection time is used to run the internet speed test.
The IPv4 ping tool is similar to the IPv6 ping tool. But it allows you to ping the IPv4 host.
To perform an IPv4 ping test, complete the following steps.
The result will help you in several ways.
Note: Online Ping tool uses the Network Tools' infrastructure to run a ping test. You cannot utilize that tool to test internal addresses on your local network. Therefore, to check the availability of resources on your local network, you need a local ping tool.
Pinging an IP address is not illegal. An IP address is much like a piece of public information, but any abuse of IP address information is prohibited.To overcome that issue, it's better to hide your IP by using VPN. After connecting to VPN, it's better to check your IP by using Show my IP tool to recheck your associated IP address.
A good and acceptable ping is about 40ms-60ms mark or lower. However, if that goes over 100ms, that is a significant delay, and at around 170ms, the games will refuse your connection entirely. If you have a 10ms ping (0.01 seconds), your gameplay will be faster and smoother than playing with a 100ms ping time.
But it depends on the game you are playing. Some games like Hearthstone may not require a low ping. Other games like Counter-Strike and Street Fighter V require precise inputs and timing.